Suspension points for round banners / ceiling banners
A common problem when suspending a round ceiling banner or a round banner is the cost of hanging points as suspensions from the hall ceiling.
In principle, the hanging points should run vertically upwards. However, you can also bring the cables together to a single point and thus only need one hanging point from the trade fair. Very important here, though, is that the tensile force towards the centre of the profile rings does not become too great. Otherwise the ring deforms slightly. Then the banner may no longer hang wrinkle-free. Therefore keep the wire ropes as long as possible so that the lateral forces are kept as small as possible.
You must also bear in mind that different regulations apply with angled cable routing. Wire ropes must not be bent in the normal holders. Special wire rope holders with a joint are required for this.
If needed, simply let us know if you have planned the central suspension of the round banner.
Tool assembly set
Everything you need to assemble some of our systems
Regular price:x
€34.20
A Knipex wire rope cutter, a small Wiha hex key set and a can of Caramba silicone spray. Tools that you don't always have in your normal tool case.
All these little helpers are strongly recommended for mounting round banners, exhibition cubes and normal ceiling hangers.Protruding wire ropes should be shortened. A clean cut is important here so that the end of the wire rope can be inserted into the holder without problems. The Knipex wire rope cutter is perfectly suited for the common wire ropes up to 3 mm diameter.The silicone spray makes the work easier with banners with a pole pocket when they are pulled into the groove in the round keder profile. With really long banners, the frictional resistance can become too great. Although it is generally advisable to slide the individual profile elements onto the banner.You don't need much tooling with our systems. Some products can be assembled completely tool-free. However, hex keys are needed for some connectors. And those are hard to replace if you don't have them.
Wire rope holder type 50 SV III ZW, fork 14x28 and safety bolt, with lateral rope exit, black
TÜV/GS & DGUV certified · tool-free · wire rope Ø 4.0 - 5.0
Regular price:x
From
€39.59
The Reutlinger wire rope holder type 50 SV III (manufacturer art. 393.005.027) is a self-locking heavy-duty wire rope holder with fork 14x28 + safety bolt and lateral rope exit (ZW). Adjustment is tool-free and infinitely variable; a locking nut secures the position.Suitable for wire ropes of 4.0 - 5.0 mm. Cylinder Ø 25 mm, total length 164.5 mm, weight 500 g. Material steel, surface black galvanised.Tested to TÜV/GS and DGUV Test OA 1851013 (DGUV regulation 17). Application: trade fair construction, event technology and rigging.
Wire rope holder type 50 SV III ZW, M12i, with lateral rope exit, black
TÜV/GS & DGUV certified · tool-free · wire rope Ø 4.0 - 5.0
Regular price:x
From
€31.41
The Reutlinger wire rope holder type 50 SV III (manufacturer art. 393.005.025) is a self-locking heavy-duty wire rope holder with internal thread M12i and lateral rope exit (ZW). Adjustment is tool-free and infinitely variable; a locking nut secures the position.Suitable for wire ropes of 4.0 - 5.0 mm. Cylinder Ø 25 mm, total length 92.5 mm, weight 249 g. Material steel, surface black galvanised.Tested to TÜV/GS and DGUV Test OA 1851013 (DGUV regulation 17). Application: trade fair construction, event technology and rigging.
Wire rope holder type 50 SV III ZW, ring, with lateral rope exit, black
TÜV/GS & DGUV certified · tool-free · wire rope Ø 4.0 - 5.0
Regular price:x
From
€32.58
The Reutlinger wire rope holder type 50 SV III (manufacturer art. 393.005.026) is a self-locking heavy-duty wire rope holder with ring and lateral rope exit (ZW). Adjustment is tool-free and infinitely variable; a locking nut secures the position.Suitable for wire ropes of 4.0 - 5.0 mm. Cylinder Ø 25 mm, total length 147 mm, weight 401 g. Material steel, surface black galvanised.Tested to TÜV/GS and DGUV Test OA 1851013 (DGUV regulation 17). Application: trade fair construction, event technology and rigging.
Wire rope holder type 50 SV III, fork 14x28 and safety bolt, black
TÜV/GS & DGUV certified · tool-free · wire rope Ø 4.0 - 5.0
Regular price:x
From
€37.27
The Reutlinger wire rope holder type 50 SV III (manufacturer art. 393.005.024) is a self-locking heavy-duty wire rope holder with fork 14x28 + safety bolt and central rope feed-through. Adjustment is tool-free and infinitely variable; a locking nut secures the position.Suitable for wire ropes of 4.0 - 5.0 mm. Cylinder Ø 25 mm, total length 125.5 mm, weight 359 g. Material steel, surface black galvanised.Tested to TÜV/GS and DGUV Test OA 1851013 (DGUV regulation 17). Application: trade fair construction, event technology and rigging.
Wire rope holder type 50 SV III, M12, black
TÜV/GS & DGUV certified · tool-free · wire rope Ø 4.0 - 5.0
Regular price:x
From
€26.44
The Reutlinger wire rope holder type 50 SV III (manufacturer art. 393.005.021) is a self-locking heavy-duty wire rope holder with external thread M12 and central rope feed-through. Adjustment is tool-free and infinitely variable; a locking nut secures the position.Suitable for wire ropes of 4.0 - 5.0 mm. Cylinder Ø 25 mm, total length 71.2 mm, weight 123 g. Material steel, surface black galvanised.Tested to TÜV/GS and DGUV Test OA 1851013 (DGUV regulation 17). Application: trade fair construction, event technology and rigging.
Wire rope holder type 50 SV III, ring integral, black
TÜV/GS & DGUV certified · tool-free · wire rope Ø 4.0 - 5.0
Regular price:x
From
€25.67
The Reutlinger wire rope holder type 50 SV III (manufacturer art. 393.005.033) is a self-locking heavy-duty wire rope holder with ring integral and central rope feed-through. Adjustment is tool-free and infinitely variable; a locking nut secures the position.Suitable for wire ropes of 4.0 - 5.0 mm. Cylinder Ø 25 mm, total length 105.5 mm, weight 248 g. Material steel, surface black galvanised.Tested to TÜV/GS and DGUV Test OA 1851013 (DGUV regulation 17). Application: trade fair construction, event technology and rigging.
Wire rope holder type 50 SV III, with Doughty Coupler T58081, with lateral rope exit, black
TÜV/GS & DGUV certified · tool-free · wire rope Ø 4.0 - 5.0
Regular price:x
From
€61.73
The Reutlinger wire rope holder type 50 SV III (manufacturer art. 393.005.040) is a self-locking heavy-duty wire rope holder with Doughty Coupler T58081 and lateral rope exit (ZW). Adjustment is tool-free and infinitely variable; a locking nut secures the position.Suitable for wire ropes of 4.0 - 5.0 mm. Cylinder Ø 25 mm, total length 202.7 mm, weight 354 g. Material steel, surface black galvanised.Tested to TÜV/GS and DGUV Test OA 1851013 (DGUV regulation 17). Application: trade fair construction, event technology and rigging.
Wire rope holder type 66 SV III ZW, fork 16x32 and safety bolt, with lateral rope exit, black
TÜV/GS & DGUV certified · tool-free · wire rope Ø 5.0 / 6.0 / 6.35
Regular price:x
From
€58.56
The Reutlinger wire rope holder type 66 SV III (manufacturer art. 393.007.705) is a self-locking heavy-duty wire rope holder with fork 16x32 + safety bolt and lateral rope exit (ZW). Adjustment is tool-free and infinitely variable; a locking nut secures the position.Suitable for wire ropes of 5.0 / 6.0 / 6.35 mm. Cylinder Ø 34 mm, total length 199 mm, weight 958 g. Material steel, surface black galvanised.Tested to TÜV/GS and DGUV Test OA 1851013 (DGUV regulation 17). Application: trade fair construction, event technology and rigging.
Wire rope holder type 66 SV III ZW, M16i, with lateral rope exit, black
TÜV/GS & DGUV certified · tool-free · wire rope Ø 5.0 / 6.0 / 6.35
Regular price:x
From
€50.82
The Reutlinger wire rope holder type 66 SV III (manufacturer art. 393.007.702) is a self-locking heavy-duty wire rope holder with internal thread M16i and lateral rope exit (ZW). Adjustment is tool-free and infinitely variable; a locking nut secures the position.Suitable for wire ropes of 5.0 / 6.0 / 6.35 mm. Cylinder Ø 34 mm, total length 116 mm, weight 576 g. Material steel, surface black galvanised.Tested to TÜV/GS and DGUV Test OA 1851013 (DGUV regulation 17). Application: trade fair construction, event technology and rigging.
Wire rope holder type 66 SV III ZW, ring, with lateral rope exit, black
TÜV/GS & DGUV certified · tool-free · wire rope Ø 5.0 / 6.0 / 6.35
Regular price:x
From
€55.07
The Reutlinger wire rope holder type 66 SV III (manufacturer art. 393.007.709) is a self-locking heavy-duty wire rope holder with ring and lateral rope exit (ZW). Adjustment is tool-free and infinitely variable; a locking nut secures the position.Suitable for wire ropes of 5.0 / 6.0 / 6.35 mm. Cylinder Ø 34 mm, total length 177.5 mm, weight 848 g. Material steel, surface black galvanised.Tested to TÜV/GS and DGUV Test OA 1851013 (DGUV regulation 17). Application: trade fair construction, event technology and rigging.
Wire rope holder type 66 SV III ZW, with Doughty Coupler T58101, with lateral rope exit, black
TÜV/GS & DGUV certified · tool-free · wire rope Ø 5.0 / 6.0 / 6.35
Regular price:x
From
€83.74
The Reutlinger wire rope holder type 66 SV III (manufacturer art. 393.007.704) is a self-locking heavy-duty wire rope holder with Doughty Coupler T58101 and lateral rope exit (ZW). Adjustment is tool-free and infinitely variable; a locking nut secures the position.Suitable for wire ropes of 5.0 / 6.0 / 6.35 mm. Cylinder Ø 34 mm, total length 229.2 mm, weight 982 g. Material steel, surface black galvanised.Tested to TÜV/GS and DGUV Test OA 1851013 (DGUV regulation 17). Application: trade fair construction, event technology and rigging.