Mitre
Mitre-cut means that, for example, two profiles have a 45° cut at the ends and can thus be joined into a right angle of 90°. Most picture frames are mitre-cut.
Ceiling hanger tension frame with print, cut to size
Versatile banner, straight and well tensioned
Regular price:x
From
€34.40
Classic ceiling hanger as a tension frame for a perfectly tensioned print. This system is ideally suited for the retail shop, the trade fair stand or exhibitions. All elements meet the necessary requirements for these areas, such as fire protection andThe surrounding profile guarantees a smooth and wrinkle-free banner with a clean finish. The keder profile made of anodised aluminium can be covered on both sides and is symmetrically constructed. This enables easy suspension with infinitely adjustable wire rope holders.
Curved display wall as tension frame incl. print
Perfectly suited as a sponsor wall, photo wall or for product presentations
Regular price:x
€34.20
/
An elegant yet simple back wall made of a sturdy tension frame. The clever part: you can define all dimensions yourself. We manufacture width, height and radius to your requirements at no extra charge.Accessories can be found below.
Exhibition banner ceiling frame suspension with tension frame
Perfect visibility for your trade fair appearance - easy motif change possible
Regular price:x
€32.00
/
The right frame for your trade fair stand. A frame above your stand provides visibility across the entire fair. You can use this system flexibly. The profiles are usable on both sides by default. You can cover the outside with printed banners and optionally the inside as well. The entire frame consists of 4 individual frames that are joined at the corners. This way the individual sides can be used separately for later applications. Here too with a single print or a double-sided print.The design of the corners can be implemented in different ways - as an open or closed variant. Both have their advantages. A frame closed right up to the corners looks visually perfect. For this, an additional vertical profile is inserted into the corners so that the banners can be carried right to the end. The outer banner is therefore correspondingly wider than the main frame. If a side is to be used individually later, this must be taken into account. With open corners it is kept simpler and is accordingly somewhat cheaper.From a width of 2600 mm, vertical support struts are required, which are automatically factored in here. With single-sided covering, these struts are visible from the inside.The number of points required for the suspensions is also calculated automatically. The minimum is 4. The suspension consists of self-locking wire rope holders and 3 m wire rope with a 3 mm diameter. All parts have the necessary TÜV certificates. The suspension points are screwed into the upper profile groove with a T-slot nut and can be positioned freely along the entire length of the profile. The wire ropes have an open end for the wire rope holder and an eye with thimble at the other end. From here you need your own fastening material such as shackles or trusses around which the wire rope can be looped.The total weight is shown to you once you have added the item to the shopping cart.
Exhibition ceiling hanger as trade fair stand frame
Printed frame for the trade fair stand, cut to size
Regular price:x
€32.00
/
These exhibition ceiling hangers ensure outstanding visibility at any trade fair. The good long-distance effect of the prints above the trade fair stand marks your location and gives visitors the necessary orientation.
A high-quality yet affordable system of anodised aluminium profiles and high-quality printed banners made of fabric.
The banners are inserted individually for each side. At the corners, the banners protrude a little so that they can then be glued.
The keder profiles are mitre-cut. The individual profiles are firmly joined with a 90° connector.
Optionally, you can select the necessary suspensions for this system. We recommend planning a suspension at least every 2 m. There is practically no limit to the length of the ceiling hangers. By default, we print on a slightly translucent material. Optionally, you can also select an opaque, i.e. completely light-impermeable, material for the ceiling hangers.
Double-sided printing of the ceiling hangers is also possible. An opaque material is automatically used for this.
All materials are B1 certified and the suspensions meet the requirements of trade fairs in Germany.
Round ceiling hanger / exhibition banner as tension frame
Barely visible frame, very good tension and printable on both sides.
Regular price:x
From
€34.50
Exhibition banner as a cylinder with tension frame technology. Thanks to its round shape, this ceiling hanger is perfectly visible from all sides. The print can be applied either on the outside or additionally on the inside. Both sides can be replaced separately.