Flat keder profile
Also called a push-in keder profile. Serves for the smooth mounting of textile banners in a round or angular frame. Here an additional flat keder made of flexible plastic is sewn onto the banner. The made-up banner is inserted into the narrow groove of the flat keder profile.
Products for flat keder and push-in keder
Ceiling hanger with aluminium profiles and print, cut to size
Fabric banner for hanging, cut to size. Universally usable for trade fairs and at the POS.
Regular price:x
From
€32.00
/
Ceiling hangers with keder profiles are a true classic. The reason is simple: easy assembly and great impact. As is so often the case, the simplest things are the best. A keder profile at the top and bottom, a printed banner in between, two wire ropes for suspension - done. The size is practically unlimited. The available length in one piece for most keder profiles is 6 m. If the banner is to be larger, several profiles can be securely joined with a splice. Even if transport size matters, the profiles can be divided. But this simple technique can do even more. We can also bend the profiles. This opens up completely new possibilities. Two circles make a beautiful round banner as a ceiling banner. Or curved profiles as circle segments combined with columns create an elegant back wall.
Exhibition banner ceiling frame suspension with tension frame
Perfect visibility for your trade fair appearance - easy motif change possible
Regular price:x
€32.00
/
The right frame for your trade fair stand. A frame above your stand provides visibility across the entire fair. You can use this system flexibly. The profiles are usable on both sides by default. You can cover the outside with printed banners and optionally the inside as well. The entire frame consists of 4 individual frames that are joined at the corners. This way the individual sides can be used separately for later applications. Here too with a single print or a double-sided print.The design of the corners can be implemented in different ways - as an open or closed variant. Both have their advantages. A frame closed right up to the corners looks visually perfect. For this, an additional vertical profile is inserted into the corners so that the banners can be carried right to the end. The outer banner is therefore correspondingly wider than the main frame. If a side is to be used individually later, this must be taken into account. With open corners it is kept simpler and is accordingly somewhat cheaper.From a width of 2600 mm, vertical support struts are required, which are automatically factored in here. With single-sided covering, these struts are visible from the inside.The number of points required for the suspensions is also calculated automatically. The minimum is 4. The suspension consists of self-locking wire rope holders and 3 m wire rope with a 3 mm diameter. All parts have the necessary TÜV certificates. The suspension points are screwed into the upper profile groove with a T-slot nut and can be positioned freely along the entire length of the profile. The wire ropes have an open end for the wire rope holder and an eye with thimble at the other end. From here you need your own fastening material such as shackles or trusses around which the wire rope can be looped.The total weight is shown to you once you have added the item to the shopping cart.
Exhibition ceiling hanger as trade fair stand frame
Printed frame for the trade fair stand, cut to size
Regular price:x
€32.00
/
These exhibition ceiling hangers ensure outstanding visibility at any trade fair. The good long-distance effect of the prints above the trade fair stand marks your location and gives visitors the necessary orientation.
A high-quality yet affordable system of anodised aluminium profiles and high-quality printed banners made of fabric.
The banners are inserted individually for each side. At the corners, the banners protrude a little so that they can then be glued.
The keder profiles are mitre-cut. The individual profiles are firmly joined with a 90° connector.
Optionally, you can select the necessary suspensions for this system. We recommend planning a suspension at least every 2 m. There is practically no limit to the length of the ceiling hangers. By default, we print on a slightly translucent material. Optionally, you can also select an opaque, i.e. completely light-impermeable, material for the ceiling hangers.
Double-sided printing of the ceiling hangers is also possible. An opaque material is automatically used for this.
All materials are B1 certified and the suspensions meet the requirements of trade fairs in Germany.