Go to homepage
Shopping cart €0.00

Exhibition cube 150 cm complete with print and suspension

150W LED lighting optional
Skip image gallery
Exhibition cube 150 cm complete with print and suspension Exhibition cube 150 cm complete with print and suspension
LED lighting for ceiling banners – detail view LED lighting for ceiling banners – detail view
Trade fair cube cube banner Trade fair cube cube banner
3D corner connector for cube profile 67 and 105 mm 3D corner connector for cube profile 67 and 105 mm
3D corner connector for cube profile 67 and 105 mm 3D corner connector for cube profile 67 and 105 mm
Wire rope holder, height-adjustable, self-locking for 3 mm Wire rope holder, height-adjustable, self-locking for 3 mm
Exhibition cube 150 cm complete with print and suspension Exhibition cube 150 cm complete with print and suspension
LED lighting for ceiling banners – detail view LED lighting for ceiling banners – detail view
Trade fair cube cube banner Trade fair cube cube banner
3D corner connector for cube profile 67 and 105 mm 3D corner connector for cube profile 67 and 105 mm
3D corner connector for cube profile 67 and 105 mm 3D corner connector for cube profile 67 and 105 mm
Wire rope holder, height-adjustable, self-locking for 3 mm Wire rope holder, height-adjustable, self-locking for 3 mm

€1,380.00

Available, delivery time: 7 - 10 Werktage

All 5 sides can be printed differently. You can create single or multi-page PDF files. The positioning of the prints happens during assembly, as each side is covered individually.
Print file upload (pdf or zip) :
A PDF file or zip folder for multiple files.
Print file upload (pdf or zip)
Upload file
    Allowed file extensions: zip,pdf Allowed file size: 19.07 MB
    0%
    Product number: BK99045.2
    EAN: 4255671400383
    Length: 1,500 mm
    Width: 1,500 mm
    Height: 1,500 mm
    Available stock: ausreichend
    Delivery time: 7 - 10 Werktage
    Support zu diesem Artikel
    Exhibition cube 150cm
    BK99045.2
    +494219607314
    Anfrage per E-Mail
    Chat im Browser starten

    Exhibition cube 150 cm complete with print and suspension

    Our most affordable exhibition cube with 150 cm edge length for your trade fair stand. Everything you need is included: frame made of sturdy aluminium double-groove profile with push-fit corner connectors for quick and easy setup, high-quality 4c print on fabric banner, finishing of the flat keder for insertion into the profile, and four suspension ropes 3 m long with wire rope holders for infinite height adjustment.

    NEW: Optionally, you can select inexpensive and very effective LED illumination for this exhibition cube. With a 150W high-power LED bulb with a simple E27 socket, you achieve very bright illumination of the cube. Power is supplied via a normal 240V connection.

    Everything included:

    • 3D frame profile made of aluminium
    • Corner connectors
    • 4c print on fabric banner
    • All 5 sides incl. print (open at the top)
    • 4 wire ropes with infinitely adjustable wire rope holders.
    • 150W LED lighting (optional)

    The exhibition cube is made from a special double-groove profile arranged crosswise to create as little shadow as possible. The frame consists of 12 equal-length double-groove profiles that are plugged together with 8 corner connectors. In addition, the struts at the corners are fixed with self-tapping screws. After covering with the banners, the construction would hold even like this. The tension of the banners with the sewn-on flat keder holds the entire frame together.
    There are two grooves in each strut for the independent mounting of each side. This results in high stability with a relatively low weight. The edge length of these cubes can theoretically be unlimited. The profiles can be extended by splices, and the banners can also be sewn to any length. Of course, with such ceiling banners there are certain limits to be observed. If the length of one side exceeds 2 m, we plan a support strut for stabilisation. It does not, of course, have to be a cube. It can also be a cuboid, i.e. a box with different edge lengths. If one side is longer than 4 m, an additional strut is installed per side. The fabric print is seamless up to 5 m wide. As roll material five metres wide is used here, the length is "limited" to 30 m before a seam would occur. But if, for example, a base area of 6x6 m is to be realised, two parts must be sewn together. Planning for such objects should simply take this into account.

    0 of 0 reviews

    Leave a review!

    Share your experiences with other customers.

    Skip product gallery

    Comparable products

    Ceiling banner cube trade fair cube
    Ceiling banner cuboid, 5-sided closed, incl. 4c print - freely configurable Ceiling hanger with the best long-distance effect! Easily backlightable, small pack size, cut to your requirements.
    Rectangular ceiling banner configurable with any side lengths. All sides can be closed. By default, 5 sides are finished with fabric print. These ceiling hangers are held together by a sturdy frame made of mitre-cut aluminium double-groove profiles and corner connectors. The printable banner fabrics are finished with flat keder and tensioned onto the frame.

    €32.00 /
    Details
    Exhibition cube 1x1 metre incl. lighting, banner print and tension
    Exhibition cube 1x1 metre incl. lighting, banner print and tension frame Complete incl. print, frame, suspension. LED lighting selectable
    Our most affordable exhibition cube at 1x1x1 m for your trade fair stand. Everything you need is included: frame made of sturdy aluminium double-groove profile with push-fit corner connectors for quick and easy setup, high-quality 4c print on fabric banner, finishing of the flat keder for insertion into the profile, and four suspension ropes 3 m long with wire rope holders for infinite height adjustment.Optionally, you can select inexpensive and very effective LED illumination for this exhibition cube. With a 150W high-power LED bulb with a simple E27 socket, you achieve very bright illumination of the cube. Power is supplied via a normal 230V connection. Everything included:3D frame profile made of aluminiumCorner connectors4c print on fabric bannerAll 5 sides incl. print (open at the top)4 wire ropes with infinitely adjustable wire rope holders.LED lighting (optional)

    From €595.00
    Details
    Ceiling frame single-sided, open corners
    Exhibition banner ceiling frame suspension with tension frame Perfect visibility for your trade fair appearance - easy motif change possible
    Version: Single-sided banner
    The right frame for your trade fair stand. A frame above your stand provides visibility across the entire fair. You can use this system flexibly. The profiles are usable on both sides by default. You can cover the outside with printed banners and optionally the inside as well. The entire frame consists of 4 individual frames that are joined at the corners. This way the individual sides can be used separately for later applications. Here too with a single print or a double-sided print.The design of the corners can be implemented in different ways - as an open or closed variant. Both have their advantages. A frame closed right up to the corners looks visually perfect. For this, an additional vertical profile is inserted into the corners so that the banners can be carried right to the end. The outer banner is therefore correspondingly wider than the main frame. If a side is to be used individually later, this must be taken into account. With open corners it is kept simpler and is accordingly somewhat cheaper.From a width of 2600 mm, vertical support struts are required, which are automatically factored in here. With single-sided covering, these struts are visible from the inside.The number of points required for the suspensions is also calculated automatically. The minimum is 4. The suspension consists of self-locking wire rope holders and 3 m wire rope with a 3 mm diameter. All parts have the necessary TÜV certificates. The suspension points are screwed into the upper profile groove with a T-slot nut and can be positioned freely along the entire length of the profile. The wire ropes have an open end for the wire rope holder and an eye with thimble at the other end. From here you need your own fastening material such as shackles or trusses around which the wire rope can be looped.The total weight is shown to you once you have added the item to the shopping cart.

    €32.00 /
    Details
    Skip product gallery

    Spare parts

    3D corner connector for cube profile 67 and 105 mm
    3D corner connector, plastic, for 3D flat keder profile, incl. screws Accessories for exhibition cubes and ceiling banners in cuboid / cube shape
    With this connector for flat keder profiles, you can create three-dimensional bodies that can be covered with printed banner fabrics. Imposing walls for exhibitions can be configured to any dimensions. The frames can also be used to build ceiling hangers as cuboids or cubes. Thanks to the sturdy construction of all materials, all parts can be reused as desired. Individual prints can be replaced, or different wall dimensions can be realised with different profile lengths.

    €13.80
    Details
    Flat keder profile aluminium 67x12 mm
    Flat keder profile aluminium 67x12 mm Profile for exhibition cubes and cube-shaped banners
    High-quality aluminium profile for fabric banners with flat keder. With this profile and in combination with the 3D corner connectors, three-dimensional banners can be realised. Cube-shaped, as a cuboid or cube, many possibilities arise for creating sturdy wall elements or room dividers. With a ceiling suspension, ceiling cubes or ceiling banners with a strong long-distance effect are created. Tips & tricksThis profile is the smaller variant. The big brother, at 105 mm, is better suited for larger final dimensions.The 3D corner connector, however, fits both profiles universally. The profiles can also be used mixed. For a room divider 4 m long but only 30 cm deep, this narrower profile can be used on the short side and the 105 mm profile on the long sides.

    €28.00 /
    Details
    Large flat keder profile for trade fair cube
    Flat keder profile aluminium double 105x12 mm Profile for large exhibition cubes and cube banners
    Flat keder profile aluminium double 105x12 mm. Particularly sturdy flat keder profile for very large three-dimensional ceiling banners of up to 4 m without a cross brace. Versatile applications in trade fair construction, for shopfitting or for modern exhibitions. Combined with our large selection of fabric banner materials, you have a particularly large scope for design.

    €32.00 /
    Details
    Flat keder profile aluminium double 12x41
    Flat keder profile aluminium double 12x41 Profile for small exhibition cubes and cube banners up to 1 m
    Flat keder profile aluminium double 12x41 mm. For small and medium tension frames in 3D construction. For cube banners or cube-shaped banners. Versatile applications in trade fair construction, for shopfitting or for modern exhibitions. Combined with our large selection of fabric banner materials, you have a particularly large scope for design.

    €24.80 /
    Details
    Reprint for trade fair cubes / ceiling banner cube - 5 sides
    Reprint for trade fair cubes / ceiling banner cube - 5 sides New prints for an existing cube frame
    A reprint of all 5 sides for existing cube frames made from our double-groove profile.All 5 sides are produced here. For each side you can upload a separate design (or a single PDF file containing 5 pages).

    €32.00 /
    Details
    Wire rope holder, height-adjustable, self-locking for 3 mm
    Wire rope holder, height-adjustable, self-locking for 3 mm For suspending ceiling banners of all kinds
    With this holder for 3 mm wire rope, ceiling suspensions can be realised conveniently. After inserting the rope, it can be pushed through continuously without slipping back. Only by pressing the spring-loaded release screw Infinitely adjustable wire rope holders are a mechanical connecting element for tool-free, quick and secure fixing and length adjustment of wire ropes. The system is based on an internal clamping mechanism with balls that lock the rope securely under tension. The self-locking wire rope holders consist of a precisely manufactured metal housing containing a clamping mechanism with steel balls that automatically grip the inserted wire rope as it is fed in. The locking happens automatically through the tensile force: the more the rope is loaded, the more firmly the mechanism grips. The rope length can be shortened by pushing it in. Lengthening is only possible after actively relieving the tension and simultaneously pressing in the upper sleeve. This allows a flexible and at the same time secure suspension. In common usage, these wire rope holders are called "Reutlinger" after the manufacturer of the same name.

    €14.80
    Details