Profilzubehör
Corner connector 90° - set of 4
Spare part for 50x52 tension frame profile
Regular price:x
€34.20
Corner connector 90° for the tension frame profile 50x52 double-sided. Both profiles must have a 45° mitre cut and be provided with two threaded holes each for the grub screws. By default, profiles or frames are supplied complete incl. these connectors with screws. This item serves as a spare part and is a set of 4 connectors with 16 M6 grub screws - for a
3 mm
hex key.
Splice / connector for keder profile aluminium M 20x46-3
For keder profile aluminium M 20x46-3
Regular price:x
€15.80
With this T-slot nut connector, multi-part keder profiles M 20x46-3 can be securely connected or extended. For round-bent profiles for large ceiling banners where the individual bent elements have to be joined, or for particularly long elements. The splice core has internal threads and is supplied with matching grub screws. (The short profile piece is not included!)Supplied with grub screws M5 x 8 hex socket (AF 2.5).
Splice for tension frame profile 50x52
Spare part for 50x52 tension frame profile
Regular price:x
€8.40
Connector for the tension frame profile 50x52. With this splice, two profiles are joined straight and securely. Half of the shaft is pushed into each of the profiles to be joined and fixed with two grub screws each.The splice is mostly used when the dimension becomes too long for transport. In principle, the profiles should be divided and spliced as little as possible. The stability is somewhat lower than when the profile is left in one piece.
Corner Connector 90° for Flat Keder Profile Aluminium 25x55
Spare part for 25x55 flat keder profile
Regular price:x
€6.40
90° corner connector for rectangular frames. The profiles are mitre-cut and this corner connector forms the positive, form-fit join at the corner. The connector is slid into the profile and fixed from behind with grub screws. Once installed, the connector is invisible. It is advisable to first tighten the screws only lightly during assembly, then insert the banner and, if necessary, slightly loosen the screws so that the frame does not warp. Once everything fits, the screws are tightened firmly by hand.
End cap for keder profile aluminium S universal 28
Small part, big impact.
Regular price:x
€1.50
Plastic end cap for keder profile aluminium S universal 28