LED Langarmstrahler

LED long-arm spotlight for exhibition walls and display walls with 50W power consumption and a luminous output of 5000 lumen, roughly equivalent to a 400-500W halogen lamp. These long-arm spotlights produce very even illumination and are available in different color temperatures. You can choose between warm white (3000K), neutral white (4000K) and cool white (5600K). The LED technology and robust construction significantly increase the service life. Depending on the selected accessory, the LED spotlights can be used for Octanorm, Aluvision, beMatrix or Syma modules. In addition, adapters for screwing and for panels are available. These LED long-arm spotlights are used for exhibition walls or displays. Thanks to their low power consumption, they can also be used well in shopfitting. The spotlight is simply placed on the profile with the selected adapters and hooks into the groove. If the spotlight is to be attached to a different exhibition wall or to a wooden display wall, a straight screw clamp or a pipe clamp as well as screw adapters are available as accessories. The LED spotlight is slid onto the clamp from the side. The lamp holder can therefore be attached independently of the spotlight. The screw clamp can be attached to any display wall up to 50 mm thick or to pipes with a 50 mm diameter. The main advantage of these long-arm spotlights is the low power consumption and the low heat generation. Especially in sales rooms or at trade fairs, a lot of light is required. With conventional lamps, the staff sometimes get thoroughly grilled. With these LED long-arm spotlights this problem is solved. The lower heat generation is also an advantage for the displayed products. Another positive effect of the lower power consumption is that up to 8 long-arm spotlights can be connected via a single 16A Schuko socket with just one supply cable. Cable clutter and overloaded fuses are no longer an issue. The standard scope of delivery always includes a 1 m connection cable. *Note: The items offered here do not come from the company Octanorm®. They are, however, compatible. The brand mentioned here was only used because it explains the product more clearly. All rights remain with the individual manufacturer or owner of the brand.

LED long-arm spotlight for exhibition walls and display walls with 30W power consumption and a luminous output of 3700 lumen, roughly equivalent to a 300W halogen lamp. These long-arm spotlights produce very even illumination and are available in different color temperatures. You can choose between neutral white (4000K) and cool white (5600K). The LED technology and robust construction significantly increase the service life. Depending on the selected accessory, the LED spotlights can be used for Octanorm, Aluvision, beMatrix or Syma modules. In addition, adapters for screwing and for panels are available. These LED long-arm spotlights are used for exhibition walls or displays. Thanks to their low power consumption, they can also be used well in shopfitting. The spotlight is simply placed on the profile with the selected adapters and hooks into the groove. If the spotlight is to be attached to a different exhibition wall or to a wooden display wall, a straight screw clamp or a pipe clamp as well as screw adapters are available as accessories. The LED spotlight is slid onto the clamp from the side. The lamp holder can therefore be attached independently of the spotlight. The screw clamp can be attached to any display wall up to 50 mm thick or to pipes with a 50 mm diameter. The main advantage of these long-arm spotlights is the low power consumption and the low heat generation. Especially in sales rooms or at trade fairs, a lot of light is required. With conventional lamps, the staff sometimes get thoroughly grilled. With these LED long-arm spotlights this problem is solved. The lower heat generation is also an advantage for the displayed products. Another positive effect of the lower power consumption is that up to 8 long-arm spotlights can be connected via a single 16A Schuko socket with just one supply cable. Cable clutter and overloaded fuses are no longer an issue. The standard scope of delivery always includes a 1 m connection cable. *Note: The items offered here do not come from the company Octanorm®. They are, however, compatible. The brand mentioned here was only used because it explains the product more clearly. All rights remain with the individual manufacturer or owner of the brand.

LED long-arm spotlight with a small switch for a big effect: the light colour can be set easily on the spotlight. This way you can respond to any lighting situation. Ideally suited for exhibition walls and display walls. With 30W power consumption and a luminous output of 3700 lumen, roughly equivalent to a 300W halogen lamp. These long-arm spotlights produce very even illumination and you can switch the light colour in Kelvin between warm white (3000K), neutral white (4000K) and cool white (5600K). The LED technology and robust construction significantly increase the service life. Depending on the selected accessory, the LED spotlights can be used for Octanorm, Aluvision, beMatrix or Syma modules. In addition, adapters for screwing and for panels are available. These LED long-arm spotlights are used for exhibition walls or displays. Thanks to their low power consumption, they can also be used well in shopfitting. The spotlight is simply placed on the profile with the selected adapters and hooks into the groove. If the spotlight is to be attached to a different exhibition wall or to a wooden display wall, a straight screw clamp or a pipe clamp as well as screw adapters are available as accessories. The LED spotlight is slid onto the clamp from the side. The lamp holder can therefore be attached independently of the spotlight. The screw clamp can be attached to any display wall up to 50 mm thick or to pipes with a 50 mm diameter. The main advantage of these long-arm spotlights is the switch for the light colour in Kelvin, the low power consumption and the low heat generation. Especially in sales rooms or at trade fairs, a lot of light is required. With conventional lamps, staff sometimes get thoroughly grilled. With these LED long-arm spotlights this problem is solved. The lower heat generation is also an advantage for the displayed products. Another positive effect of the lower power consumption is that up to 8 long-arm spotlights can be connected via a single 16A Schuko socket with just one supply cable. Cable clutter and overloaded fuses are no longer an issue. A 1 m connection cable is always part of the standard scope of delivery.

Long-arm spotlight for display walls and exhibition walls with 25W power consumption and a luminous output of 2525 lumen, equivalent to a 250W halogen lamp. These long-arm spotlights produce very even illumination with different light colours. The LED technology and robust construction significantly increase the service life. Depending on the selected accessory, the LED spotlights can be used for Octanorm, Aluvision, beMatrix or Syma modules. In addition, adapters for screwing and for panels are available. These LED long-arm spotlights are used for exhibition walls or displays. Thanks to their low power consumption, they can also be used well in shopfitting. The spotlight is simply placed on the profile with the selected adapters and hooks into the groove. If the spotlight is to be attached to a different exhibition wall or to a wooden display wall, a straight screw clamp or a pipe clamp as well as screw adapters are available as accessories. The LED spotlight is slid onto the clamp from the side. The lamp holder can therefore be attached independently of the spotlight. The screw clamp can be attached to any display wall up to 50 mm thick or to pipes with a 50 mm diameter. The main advantage of these long-arm spotlights is the low power consumption and the low heat generation. Especially in sales rooms or at trade fairs, a lot of light is required. With conventional lamps, the staff sometimes get thoroughly grilled. With these LED long-arm spotlights this problem is solved. The lower heat generation is also an advantage for the displayed products. Another positive effect of the lower power consumption is that up to 8 long-arm spotlights can be connected via a single 16A Schuko socket with just one supply cable. Cable clutter and overloaded fuses are no longer an issue. The standard scope of delivery always includes a 1 m connection cable. *Note: The items offered here do not come from the company Octanorm®. They are, however, compatible. The brand mentioned here was only used because it explains the product more clearly. All rights remain with the individual manufacturer or owner of the brand.

The LED long-arm spotlight 20W is a modern LED light made of sturdy aluminium for your trade fair stand. Ideal for walls up to 2.5 m high with an extensive range of mounting options. This 20-watt LED spotlight delivers a luminous output of up to 2,300 lumen and can be connected in series with a connecting cable (IEC C8 – C7) for up to 8 spotlights (also selectable as an accessory).

Long-arm spotlight for display walls and exhibition walls with 25W power consumption and a luminous output of 2600 lumen, equivalent to a 250W halogen lamp. These long-arm spotlights produce very even illumination with a pleasant neutral white. The LED technology and robust construction significantly increase the service life. The LED spotlights come including an adapter for Octanorm walls (OctaWall), These LED long-arm spotlights are used for exhibition walls or displays. Thanks to their low power consumption, they can also be used well in shopfitting. A holder for Octanorm and other profile systems is always included in the scope of delivery. To do this, the spotlight is simply placed on the profile and hooks into the groove. If the spotlight is to be attached to a different exhibition wall or to a wooden display wall, a straight screw clamp or a pipe clamp is available as an accessory. The LED spotlight is slid onto the clamp from the side. The lamp holder can therefore be attached independently of the spotlight. The straight screw clamp can be attached to any display wall up to 52 mm thick. The pipe clamp is suitable for pipes from 25 mm to 35 mm. The main advantage of these long-arm spotlights is the low power consumption and the low heat generation. Especially in sales rooms or at trade fairs, a lot of light is required. With conventional lamps, staff sometimes get thoroughly grilled.With these LED long-arm spotlights this problem is solved. The lower heat generation is also an advantage for the displayed products. Another positive effect of the lower power consumption is that up to 10 long-arm spotlights can be connected via a single 16A Schuko socket with just one supply cable. Cable clutter and overloaded fuses are no longer an issue. The standard scope of delivery always includes a 1 m connection cable AND a 2.5 m connecting cable. This is also an extension cable. A long-arm spotlight can therefore be connected with a 3.5 m cable and each additional spotlight connected to the previous one at a distance of 2.5 m.

An Aluvision bematrix adapter for our LED long-arm / cantilever spotlights. The adapter is plugged into the walls. All our LED long-arm spotlights from 20 W are compatible with this adapter.

A versatile screw clamp for our LED long-arm spotlights. This lamp holder can be screwed onto pipes up to 52 mm in diameter (trussing) and onto walls up to 48 mm. The long-arm spotlight can then be slid onto the rail with its groove. In addition, there is a small grub screw with hex socket, with which the lamp can be additionally fixed.

Connection cable Wieland 1.5 m black for our LED long-arm spotlights and, of course, for many other applications.

Extension cable Wieland 2 m black for our LED long-arm spotlights and, of course, for many other applications.

A universal adapter for our LED long-arm spotlights. This lamp holder can be screwed onto any wall. The long-arm spotlight can then be slid onto the rail with its groove. Available in 10 cm and 17 cm widths.

A universal adapter for our LED long-arm / cantilever spotlights. This lamp holder can be plugged onto a 16, 19 or 22 mm wall. The long-arm spotlight can then be slid onto the rail with its groove.

This screw clamp is designed for exhibition walls or other supports up to 52 mm thick. It has a mount on top for the LED cantilever spotlights with 25 W or 11 W.

This pipe clamp is designed for pipes or other supports from 30 to 34 mm thick. It has a mount on top for the LED cantilever spotlights with 25 W or 11 W.

An Octanorm adapter (type 1) for our LED long-arm spotlights. The adapter can be hooked into the profile groove of the Octanorm system. All our LED long-arm spotlights from 20 W are compatible with this adapter.

Extension cable IEC appliance connector C13 - C14 2 m black for our LED long-arm spotlights and, of course, for many other applications. You can chain several exhibition spotlights together and operate them from a single socket. Please note the respective power data of the LED spotlights. Depending on the model and power, a different number of spotlights can be connected in series.