Ceiling banner for the trade fair stand. By default, 5 sides are finished with high-quality fabric print. The material is available backlightable or opaque. The banners can also be replaced easily. These ceiling hangers are held together by a sturdy frame made of mitre-cut aluminium double-groove profiles and corner connectors. The printable banner fabrics are finished with flat keder and tensioned onto the frame. The standard size for this version is a 3 x 2 m base area; the height can be selected variably. You can choose other dimensions. For further intermediate sizes, simply send us an e-mail at shop@banner-kontor.de

Our most affordable exhibition cube with 150 cm edge length for your trade fair stand. Everything you need is included: frame made of sturdy aluminium double-groove profile with push-fit corner connectors for quick and easy setup, high-quality 4c print on fabric banner, finishing of the flat keder for insertion into the profile, and four suspension ropes 3 m long with wire rope holders for infinite height adjustment. NEW: Optionally, you can select inexpensive and very effective LED illumination for this exhibition cube. With a 150W high-power LED bulb with a simple E27 socket, you achieve very bright illumination of the cube. Power is supplied via a normal 240V connection. Everything included: 3D frame profile made of aluminium Corner connectors 4c print on fabric banner All 5 sides incl. print (open at the top) 4 wire ropes with infinitely adjustable wire rope holders. 150W LED lighting (optional) The exhibition cube is made from a special double-groove profile arranged crosswise to create as little shadow as possible. The frame consists of 12 equal-length double-groove profiles that are plugged together with 8 corner connectors. In addition, the struts at the corners are fixed with self-tapping screws. After covering with the banners, the construction would hold even like this. The tension of the banners with the sewn-on flat keder holds the entire frame together. There are two grooves in each strut for the independent mounting of each side. This results in high stability with a relatively low weight. The edge length of these cubes can theoretically be unlimited. The profiles can be extended by splices, and the banners can also be sewn to any length. Of course, with such ceiling banners there are certain limits to be observed. If the length of one side exceeds 2 m, we plan a support strut for stabilisation. It does not, of course, have to be a cube. It can also be a cuboid, i.e. a box with different edge lengths. If one side is longer than 4 m, an additional strut is installed per side. The fabric print is seamless up to 5 m wide. As roll material five metres wide is used here, the length is "limited" to 30 m before a seam would occur. But if, for example, a base area of 6x6 m is to be realised, two parts must be sewn together. Planning for such objects should simply take this into account.

Our most affordable exhibition cube at 1x1x1 m for your trade fair stand. Everything you need is included: frame made of sturdy aluminium double-groove profile with push-fit corner connectors for quick and easy setup, high-quality 4c print on fabric banner, finishing of the flat keder for insertion into the profile, and four suspension ropes 3 m long with wire rope holders for infinite height adjustment.Optionally, you can select inexpensive and very effective LED illumination for this exhibition cube. With a 150W high-power LED bulb with a simple E27 socket, you achieve very bright illumination of the cube. Power is supplied via a normal 230V connection. Everything included:3D frame profile made of aluminiumCorner connectors4c print on fabric bannerAll 5 sides incl. print (open at the top)4 wire ropes with infinitely adjustable wire rope holders.LED lighting (optional)

Rectangular ceiling banner configurable with any side lengths. All sides can be closed. By default, 5 sides are finished with fabric print. These ceiling hangers are held together by a sturdy frame made of mitre-cut aluminium double-groove profiles and corner connectors. The printable banner fabrics are finished with flat keder and tensioned onto the frame.